Download Technical Data Sheets

Thank you! Your submission has been received!
Oops! Something went wrong while submitting the form.

Cicorepair ®FC

Cicorepair®FC is polymer rich cementitious fairing coat which has beendesigned to smooth the roughness of concrete and even masonry surfaces.

It’s been adjusted to be used for relatively small thicknessnot more than 3 mm, meanwhile it could be used for holes filling up to 10 mmdepth.

For thicker layers repair, it’s recommended to use othersuitable product of Cicorepair®range.

Cicorepair®FC could be applied by using plastering tools over the dampsurfaces without priming.

DOWNLOAD

Cicorepair®Fill

Cicorepair®Fill is fiber and polymer modified cementitious filling and repairmortar which has been designed to provide excellent shrinkage control andflexural strength. It also prevents crack propagation.

Cicorepair®Fillis designed to fill the deep cavities and holes especially whenwaterproofing is desired. It obtains low permeability and good abrasionresistance as well.

Cicorepair®Fillis applied by gloved handsin general, or by other plasteringtools depending on its cohesive consistency which allows using it as a fillingmortar for deep holes like tie rods tubes.

Cicorepair®Fillhas high bonding strength with most of construction substrates,including PVC tubes.

DOWNLOAD

Cicorepair ®CR

Cicorepair®CR is one component waterproofing repair mortar for concrete orany cementitious substrates.

Cicorepair®CR contains portland cement, specially treated quartz sand,reactive silica and active chemicals. It needs only to add water prior toapplication.

When applied on the concrete surfaceit forms insoluble crystals in concrete pores to prevent any further wateringress and allow concrete to breath.

Cicorepair®CRis designed to be used as a water barrier mortar in the criticalsections of the water structures, especially which are subjected to retainlarge amounts of water under great pressure.

Cicorepair®CR could be applied by hand or by other plastering tools.  It is applicable to be used in the range of 2mm to 10 mm thickness vertically in one go, while in horizontal application; itcould be applied up to 40 mm.

Is nontoxic; therefore, it could beused in contact with potable water.

DOWNLOAD